21" x 2.15" STAR HUB FRONT WHEEL S/S SPOKES TIMKEN BEARINGS CHOPPER HD HARLEY

Description

Increase traffic to your listing with Auctiva's FREE Scrolling Gallery.
"AMERICAN BUILT"
WE HAVE BEEN BUILDING STOCK & CUSTOM WHEELS FOR OVER 45+ YEARS!
"WE" ARE A LICENSED MOTORCYCLE DEALER FOR OVER 45+ YEARS ! ! !
WE DON'T WORK OUT OF OUR "GARAGE" BECAUSE WE MAKE "QUALITY' MOTORCYCLE WHEELS for OVER 45+ YEARS !
21"x 2.15" CHROME RIM
CHROME STAR HUB
TIMKEN BEARINGS
11/16" size
same as the Stock Needle Bearings and uses the Same Stock Axle, Sleeve and Spacers
6 GA.
/ 8GA
"Polished Stainless Steel Spokes"
Stainless Steel Spokes are "Much Stronger" than Stock Spokes and Chrome Spokes and Never will rust..
Includes a RIM LINER installed on Every Wheel
Trued to Factory Spec's or "BETTER"!!!  Ours= .020"  (about 1/2 of Factory Wheels)
"NOT"  like the China built Spool Hub Wheels that say in their ad: It is the  customers responsibilty to check the Spokes for tightness after the  first 500 miles!
WE BUILD THEM RIGHT THE FIRST TIME!!!
You do
NOT
have to Check the Spokes for "Tightness" or the Wheels for "True" that you buy from us because:
"WE BUILD them RIGHT the FIRST TIME" !!!
We  Tighten All Spokes to Factory Spec's or Tighter and ALL of "Our Wheels"  are Trued to .020" or Less!!!   I'll bet you that you "Can't find a  China Wheel" out of the box that's Trued to .020" or Less!!!!!
This  is "NOT" in OUR AD but it is in the Cheap China Wheels:   **NOTE: All  spokes on wheel need to be inspected and re-torqued after 500 miles of  original installation.**
If you are only looking for the "Cheapest Price" and you do "NOT" care  if the Spokes come loose or Break?  and you have to take your Wheel off  of your bike and then take the Tire off of the Wheel (You CANNOT True  any Wheel Properly with the Tire on the Rim) and then find a shop to  "Torque" your Spokes Properly and then "True" your Wheel to .020" or  Less (Properly Like we do) and then "Re-mount" and "Re-balance" your  tire and that is really going to "Save You" Money in the long run???    I  don't think so!!!
There  is a "Reason" that some of the Other people that sell Wheels put this  in their ad!  They Already know that + 90% or more of the China made  Wheels come back with Loose or Broken Spokes!!!    We haven't had even "1" Spoke Break on any of Our Wheels in the Last 45+ Years ! ! !
WHEN YOU BUY
OUR WHEELS
, YOU WILL
"NEVER"
HAVE TO CHECK THE TIGHTNESS OF OUR SPOKES BECAUSE:
WE DO IT "RIGHT" THE "FIRST TIME"
COMES WITH 11/16"= .6875" WHEEL BEARINGS
We can Mount & Balance any Tire for No Extra Cost (Labor) if Asked at the Time you Purchase this Wheel)
That way when you take it out of the box you will be ready to put it on your bike!  Great if you don't live close to a bike shop and we have Balanced 1,000's of Tires so we know how to do it ! ! !
You will have to pay for the Tire, tube and weights but the Labor will be "Free"
We stock the following tires for a 21" and more:  Avon, Dunlop, Metzler, Contintal, Pirelli, Shinko's, V-Rubber and more!   What would you like?
Most Tires, Tubes mounted and balanced will cost from + 0.-0. more.
THESE ARE AVAILABLE IN OUR OTHER EBAY AUCTIONS!
IF YOU DON'T SEE YOUR SIZE (YEAR, MAKE and MODEL) PLEASE LET US KNOW. You can Call our Shop of Over 45+ Years
*602/437/0829) if you want a Fast/Quick answer!!!
Shop Hours are: Tue-Fri 9am-6pm & Sat 10am-4pm
We are Closed on Sundays & Mondays
It's Better to call in the Afternoon, not right at 9am when we Open
ask for me, Bob Toller Owner of Bob's Cycle Supply Since: 1976
Note: We will be Posting More/Better Photos next week.
We Build over 500 Different Combinations of
"Star Hub Wheels"
in the following different Diameters and Widths:
16" x 3.00",   16" x 3.50"
18" x 1.85",  18" x 2.15", 18" x 2.50", 18" x 3.50", 18" x 4.25"
19" x 1.85", 19" x 2.15", 19" x 2.50"
21" x 1.50", 21" x 1.60", 21" x 1.85", 21" x 2.15", 21" x 3.25", 21" x 3.50"
23" x 1.60", 23" x 3.00", 23" x 3.50"
(Special Order Rims: 17", 21" x 3.00",  18" x 2.25", Etc...)
We also build over 1000 Different Combinations of "OUR SPOOL HUB WHEELS" ! ! !
We Don't do it in our "Garage or Back Yard" like some Sellers here on Ebay ! ! !
Keep in mind if your Not Good Enought to have a "Real Shop" and you do it on Week Ends, in your Spare Time then:
"How Good Can the Wheels Be"???
Don't "Trust YOUR LIFE to TWO GRUNTS IN A GARAGE" ! ! !
Photo # 1..........Shows Our "Star Hub Complete Wheel"  Star side with Timken Bearings that we have built for Years ! ! !
Photo # 2........................................ Shows Our Chromed "Star Hub"  close up  (Star side view) we have built for Years ! ! !
Photo # 3..... Shows
Our "Star Hub Complete Wheel"  Brake side with Timken Bearings that we have built for Years ! ! !
Photo # 4.....................................
Shows Our Chromed "Star Hub"  close up  (Brake side view) we have built for Years  ! ! !
Photo # 5.. Our Chromed  21" x 2.15" Rim that we have made 1000's of Wheels with in the it the last 45+ years USA ! ! !
Photo # 6.
Photo # 7.
Photo #8.
Photo # 9.  Buy "American Built Wheels"    Keep Americans Working!   Plus we build a much better Wheel than "Anyone in China"
Photo # 10.............. Our Wheel Flyer with Info about the more than 5,000 Different Combinations of Wheels that we Build / Mfg. ! ! !
Customers Question:
Can I run my stock axle, brake sleeve and spacer with your Timken Star Hub Wheels?    Thank you
Our Answer:
Hello,  Yes you can use the Stock HD and Custom axle, brake sleeve and spacers with our Timken Bearing Star Hub.    About 1 out of 100 times there may be a little more that recommended side to side play with the Timken bearing hubs but you just need to check it by putting in the axle and axle sleeve and feeling the end  play (side to side) movement and if it feels more than it should I usually turn the "shoulder" back about 1/16" on the axle where it steps down at the end of the 11/16" and then check it again.    Thank You Very Much for Your Business! We Hope to do More  Business with you Again.
Bob's Cycle Supply Building Stock & Custom  Wheels for Over 45+ Years. Since: 1976 We Build Over 5,000 Different  Combinations of Stock & Custom Wheels.
azharleybob
Please, watch for our future listings for more sizes and Styles of Custom Spool Hub Wheels !!!
"WE BUILD CUSTOM WHEELS"
"FOR OVER 45+ YEARS"
Since: 1976
Be sure to add me to your
favorites list
!
Will ship to
: USA and International
Shipping costs are for lower 48 States only.
Insurance is your choice . It is aprox
.75 per of value for insurance. Please, email us.
Multiple orders will reduce overall shipping costs.
If you are in Hawaii or Alaska or out of the USA,
International  Shipping will be USPS, Priority Mail International. Delivery time is  6-10 days for most Countrys but to the "United Kingdom" is Always takes  more time than Other Countrys!! (I don't know why but to the United  Kingdom it is usually 2-3 Weeks).
Credit Cards
: Bob's Cycle Supply accepts MasterCard, Visa and Discover cards. To make a credit card transaction over the phone, please call
*602/437/0829)
and be sure to have the item number(s) and your credit card information on hand.
Thanks for looking!
9