Dyna Beads 2oz Tire Balancing Refill for Harley Motorcycle Honda Triumph Yamaha

Description

Welcome to Get Lowered Cycles
____________________________
Dyna Beads Tire Balancing
This kit includes:
One 2oz pack
Filtered Valve cores and Applicator required
Best for existing (mounted) tire installations
Dyna Beads dynamically balance tires on the move, resulting in a smoother ride, and one that lasts the life of the tire.
Dyna Beads are small ceramic spheres, high in density and perfectly smooth, that travel inside the tire to locate themselves opposite heavy points to eliminate out-of-balance motion.
The result is not only a smoother ride, but a better look - Dyna Beads eliminate the need for spoke or stick-on weights applied to those beautiful alloys.  They can be used with tubes or tubeless tires, and work for scooters as well.
Dyna Beads are 100% environmentally friendly ceramic, impervious to moisture, and non-abrasive to inner liners and tubes. No special air drying is needed, and Dyna Beads can be installed directly into the tire at mounting time, or after, through the valve stem.
Motorcycles
Motorcycle applications are easy for all bikes, 2 wheel or 3 wheel
Front
80 - 120 mm tire width
1 oz
80 - 120 mm tire width (BMW Telelever only)
2 oz
130 mm tire width
2 oz
Rear
130 mm - 240 mm width
2 oz
250 mm - 360mm tire width
3 oz
195 - 205 car tires on the rear
3 oz
M Series Tires Sizes
MH
– use 80 mm width
MR
– use 120 mm width
MJ
– use 90 mm width
MT
– use 130 mm width
MM–
use 100 mm width
MU
– use 140 mm width
MN or MP
– use 110 mm width
MV
– use 150 mm width
These codes are typical for Harleys but can be for any tire. The codes do not go beyond 150mm in width. With these tires, the first number of the tire size is not the actual width, it is just a number. The M-code is what tells you the actual width.
Scooters
10" diameter wheels (scooters)
1 oz
12" & Up diameter wheels (scooters)
2 oz
Dual Purpose / Off Road with Rim Locks
Front - 80 - 120 mm tire width
2 oz
Rear - 130 -230 mm width
3 oz
Rim Locks - add one ounce over what you normaly use for that size tire to accomodate the additional weight of the rim lock. Two rim locks opposite each other don't require any more Dyna Beads other than stated above, as they have a tendency to cancel each other out.
Note:
Filtered valve cores do not fit all stems. They require a seat 1-1/4" down in the stem. If you cannot use them, simply rotate the tire so the valve stem is about the 6:00 position, then give the valve stem a quick shot of air prior to checking pressure.
____________________________
All products are brand new and in original packaging.
If you have any questions or need help with an item then please contact us.
International Buyers – Please Note:
Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
eBay Inventory Software
and
eBay Automated Listing
Powered By: