FY6900-60M DDS Signal Functions Generator Counter Arbitrary Waveform 0.01-100MHz

Description

Specifications: Model: FY6900-60M Sine: 0 ~ 60 MHz Square: 0 ~ 25 MHz Ramp, Triangle: 0 ~ 10 MHz Pulse: 0 ~ 10 MHz TTL/CMOS: 0 ~ 20 MHz Arbitrary Waveform: 0 ~ 10 MHz Advantage: 1. FY6900 user interface displays the parameters and waveforms of the two channels at the same time. Each function has a separate user interface， different contents will be displayed when different functions are enabled. 2. The instrument uses 14-bit high-speed D/A converter chip (5Vpp output quantization error is less than 1mV), 250MSa/s sample rate, 14bits vertical resolution. 3. Enable to store 64 arbitrary waveform data files, each one of waveform storage depth 8192 points * 14bits; Package Included: 1 x FY6900-60M DDS Signal Generator 1 x Power Cable 1 x USB Data Cable 1 x BNC-BNC Cable 2 x Q9 Clip Cables
Store category
Sign Up Now !
You may also like
FY6900-60M DDS Signal Functions Generator Counter Arbitrary Waveform 0.01-100MHz
Product Description
Description:
FY6900 series Dual-channel Function / Arbitrary waveform generator is a set of Function Signal Generator, Arbitrary Waveform Generator, Pulse Generator, Analog / Digital modulator, VCO, Sweep, Counters and Frequency Meter and other functions in a high Performance, cost-effective, multi-function signal generator. Abundant shortcut keys and graphical user interface simplifies every operation. Users do not have to spend a lot of time to learn and familiar with the operation of the instrument, you can be skilled use. For education, research and development, production, testing, maintenance and other industries, it is your best choice.
The instrument adopts the Direct Digital Synthesizer (DDS) technology and provides stable, precise, pure and low distortion signals. Surface mounting technology improves interference immunity and operational life span. Due to communications with extensive users and fully understanding to users’ practice, we regard users’ demand as the most important factor in R&D. Continuously innovation and listening users’ suggestions, we try to offer customers better products with higher cost performance.
Specifications:
Model: FY6900-60M
Sine: 0 ~ 60 MHz
Square: 0 ~ 25 MHz
Ramp, Triangle: 0 ~ 10 MHz
Pulse: 0 ~ 10 MHz
TTL/CMOS: 0 ~ 20 MHz
Arbitrary Waveform: 0 ~ 10 MHz
Features:
- Adopt the Direct Digital Synthesizer (DDS) technology and provide stable, precise, pure and low distortion signals
- Adopt ABS plastic shell with table type design. Use 110V (AC) wide range voltage power supply
- The standard 3-pin power plug increases the grounding protection and effectively eliminates the leakage current on the BNC terminal
- 2.4 inch TFT Color LCD with 320×240 resolution, displaying parameters and graphics of the two channels at the same time
- The instrument uses 14-bit high-speed D/A converter chip (5Vpp output quantization error is less than 1mV), 250MSa/s sample rate, 14bits vertical resolution
- Can output up to 97 groups of functions / arbitrary waveform, contains 33 groups of preset waveforms and 64 groups of user-defined waveforms. Preset waveforms: Sine, Square (Duty Cycle adjustable), Pulse (Pulse width and cycle time can be set accurately), Triangle/Ramp, CMOS(0~10V), Four channels TTL, Exponential Rise, Exponential Fall, Noise, ECG, DC etc.
- Enable to store 64 arbitrary waveform data files, each one of waveform storage depth 8192 points * 14bits
- Various modulation types: AM, FM, PM, ASK, FSK and PSK modulations
- Sweep Function: It can sweep 4 properties of signals including frequency, amplitude, offset and duty cycle; It has Linear and Logarithm two sweep types; 0.01S~999.99S sweep time; Up, Down and roundtrip sweep directions
- VCO Function (Voltage Control Output): Can be achieved by an external input signal：voltage controlling frequency, voltage controlling amplitude, voltage controlling offset, voltage controlling duty cycle and PWM modulations
- Burst Output Function: There has Manual Trigger, internal CH2 Trigger, and External Trigger for your options. It can output 1~1048575 pulse trains
- 100M Frequency meter function: It can measure frequency, period, pulse width and duty cycle. Max. frequency workable is 100MHz and Min. frequency workable is 0.01 Hz
- Counter Function: It has 2 coupling measure modes including DC coupling and AC coupling. This design can solve inaccuracy problem of AC coupling
- Standard dual full functional channels which are equivalent to two independent generators.
- Channel SYNC Function: Support waveform copy and state copy between channels
- Support two or more signal generators connected to achieve multi-channel output, the maximum support 16-channel synchronous output, the phase between each channel can be adjusted
- Precisely adjust the phases of the two channels, Precision can be 0.01°
- Minimum amplitude resolution can be up to 1 mV. Amplitude range is 0~20Vpp
- Duty-cycle of each channel can be adjusted independently0.01%-99.99%, the adjusting resolution is 0.01%
- -10V~+10V DC Offset function; Resolution 0.001V
- Save function: It can save 20 sets user-set parameters and can be loaded at anytime.
- Communicating function: All functions can be controlled by PC program and the communication protocol is open for secondary development
- Output short-circuit protection: All channels can work more than 60 seconds when the load is short-circuited.
- Provide powerful waveform editing PC software. It supports user defined waveform editing and visual control of various parameter indicators
- Can choose our FYA2000S series or FPA1000 series power amplifier to output 20W~100W signal in DC-10MHz width without any distortion
Advantage:
1. FY6900 user interface displays the parameters and waveforms of the two channels at the same time. Each function has a separate user interface， different contents will be displayed when different functions are enabled.
2. The instrument uses 14-bit high-speed D/A converter chip (5Vpp output quantization error is less than 1mV), 250MSa/s sample rate, 14bits vertical resolution.
3. Enable to store 64 arbitrary waveform data files, each one of waveform storage depth 8192 points * 14bits;
Package Included:
1 x Signal Generator
1 x USB Cable
1 x Power Cable
1 x BNC-BNC Cable
2 x BNC-Clip Cable
Notes:
1. Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.
2. Due to the light and screen difference, the item's color may be slightly different from the pictures. Thanks for your understanding
Payment
Delivery details
Returns Policy
Feedback
Contact us
Payment
1. All payments must be prepaid.
2. We only accept payment via Paypal. Please kindly check if you can do the payment via PayPal before placing an order,Payment must be received within 7 days after order is made.
Delivery details
1. We are not responsible for undeliverable address. We reserve the right to charge the shipping fee again for returned items due to wrong address.
2. Items are generally shipped out the next business day after your payment has been cleared (Sat. & Sun. excluded.)
NOTE：Shipping:
The item will be shipped from our US warehouse to United States, which is more faster than from aboard.
2-7 working days to:USA
4-10 working days to:Canada
it may take a bit longer time, due to local dispatches ,
Customs checking, High Season period, eg. x'mas or other reasons. Your patience is always appreciated
2-7 working days to: USA
4-10 working days to: Canada
12-20 working days to: Other countries
Returns Policy
1. We offer 30 days money back guarantee return policy.
2. Our warranty does not extended to any products that are physically damaged or that are not under normal operating conditions as a result of misuse or improper installation on the buyer/user's part.
3. In all cases, buyers pay shipping fees at their own cost to return products for exchange or refund. We will be responsible for the postage of replacements. Refund will be made upon receipt of the returned item.
Feedback
specialized in manufacturing and selling Camera equipment, camera materials and specialty products. We are always working according to international standards and serve our customers from all over the world. Taking the purpose of "meeting different requirements from our overseas customers",
.Your comments about our products are welcomed. We hope to have the opportunity to establish business relationships with you. Our goal is "providing you both high quality products and the best prices".
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you , immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
Contact us
Dear friend: Welcome to  me my services are available: Monday To Friday: 8:30 to 18:00 (Beijing China time)
1. We are in different time zones, during the working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and considerable to give us a little more time.
2, please with ebay message if we made a deal on ebay. E-mail is often filtered as spam.
3, Please wait for our reply to your email, we will do our best to help you solve the problem.
On May-17-21 at 23:05:04 PDT, seller added the following information: