Ibanez JEMJR / Jem Jr late HSH HxH Hxx pickguard post-2015 many colours

Description

Ibanez JEMJR pickguard
For JEMJR models made in Indonesia since 2015
Custom made to order
- please allow 2-4 days for manufacture
How to identify the correct Ibanez RG/Jem pickguard for your guitar (see image 2):
How to identify the correct Ibanez RG/Jem pickguard for your guitar (see second picture):
on pickguards for RG/Jem guitars made in countries other than Japan if you extend a line through the pickup switch slot it will usually pass between mounting screws (blue dotted line) - if the line passes through a mounting screw on yours check our pickguard listings for Ibanez RG / Jem pickguards made in Japan
pickguard shapes changed around 2010/11 - late pickguards have a pickguard mounting screw immediately below the bridge (red dotted circle) whereas early pickguards have a mounting screw beside the volume control - if yours is beside the volume control check our pickguard listings for
Ibanez JEM-JR / JEM333 pickguards made from 2002 - 2012
if in doubt ask for a pdf scan to print out and check
How to order:
1.
Choose
colour
from first drop-down menu
(
colour information below
)
2.
From second drop-down menu choose from the following:
HSH
:
Routed for humbucker pickups in bridge and neck positions and a single coil pickup in middle position - see images 1-3
HxH
:
Routed for humbucker pickups in bridge and neck positions - see images 4-5
Hxx
:
Routed for a single humbucker in bridge position with no controls - see images 6-7
Controls can be added on request - please request via a message for seller at checkout
NB
-
make sure you save any message to seller left at checkout
Pickguard screws are available
here
Pickguard fitting instructions can be found
here
Left hand version available
here
What does this pickguard fit?
(
NB
- we cannot guarantee it will fit your guitar)
Shape to fit Ibanez JEMJR models made in Indonesia after 2015
Does not fit any other Ibanez models - pickguards for other Ibanez models can be found on our other listings
Printable pdf template available on request
Alternate pickup configurations available upon request
Please use contact seller link to ask any questions
Please check that the pickguard fits your guitar before removing the protective film.
Returns are not accepted if the film has been removed or the pickguard modified in any way.
New & unused with clear film protection on front - remove after fitting
Guitar body not included
Please visit
our shop
and check out our
other items
!
Colour Variations:
(click
here
to view additional images and/or to order samples)
Vintage thickness colours
(laminated pvc sheet - typical thickness approx 1.6mm/0.06" - straight (no bevel) edge -
45 degree bevel available on request
)
Black 1 ply
White 1 ply
Vintage White 1 ply
Solid colours
(laminated pvc sheet - typical thickness approx 2.3mm - 45 degree bevelled edge):
Black 1 ply
(approx 2.2mm thick)
Black 3 ply:
Black/White/Black
Black 5 ply:
Black/White/Black/White/Black (typical thickness approx 2.5mm)
Matt Black 1 ply
(lightly textured surface)
-
straight (no bevel) edge available on request
Matt Black 3 ply:
Matt black (lightly textured surface)/White/Black
White 1 ply
(approx 2.2mm thick) -
straight (no bevel) edge available on request
White 3 ply:
White/Black/White
Aged White 3 ply:
Aged White/Black/Aged White
Vintage White 3 ply:
Vintage White/Black/Vintage White
Mint Green 3 ply:
Mint Green/Black/Mint Green
Pale Mint Green 3 ply:
Pale Mint Green/Black/Pale Mint Green
Light Mint Green 3 ply:
Light Mint Green/Black/Light Mint Green
Vintage Mint Green 3 ply:
Vintage Mint Green/Black/Vintage Mint Green
Cream 1 ply
(approx 1.9mm thick) -
straight (no bevel) edge available on request
Cream 3 ply:
Cream/Black/Cream
Vintage Cream 3 ply:
Vintage Cream/Black/Vintage Cream
Red 3 ply:
Red/Black/Red
Pink 4 ply:
Pink/White/Black/White
Red 4 ply:
Red/White/Black/White
Orange 4 ply:
Orange/White/Black/White
Yellow 4 ply:
Yellow/White/Black/White
Green 4 ply:
Green/White/Black/White
Blue 4 ply:
Blue/White/Black/White
Purple 4 ply:
Purple/White/Black/White
Tortoiseshell colours
(celluloid tortoiseshell layer backed with pvc layers - typical thickness approx 2.4mm - 45 degree bevelled edge):
RT1 Red Tortoiseshell #1 4 ply:
Red Tortoiseshell/White/Black/White
RT2 Red Tortoiseshell #2 4 ply:
Red Tortoiseshell/White/Black/White
Dark Red Tortoiseshell 4 ply:
Dark Red Tortoiseshell/White/Black/White
Vintage Red Tortoiseshell 4 ply:
Vintage Red Tortoiseshell/White/Black/White
Vintage Dark Tortoiseshell 4 ply:
Vintage Dark Tortoiseshell/White/Black/White
Brown Tortoiseshell 4 ply:
Brown Tortoiseshell/White/Black/White
Tortoiseshell colours
(printed tortoiseshell layer backed with pvc layers - typical thickness approx 2.4mm - 45 degree bevelled edge):
PRT Dark Red Tortoise Pattern 4 ply:
Dark Red Tort/White/Black/White
Red Marble
Tortoise
Pattern 4 ply
: Red Marble Tort/White/Black/White (approx 2.3mm thickness - 45 degree bevelled edge)
Dark Red Swirl Tortoise Pattern 4 ply:
Dark Red Swirl Tort/White/Black/White (approx 2.3mm thickness - 45 degree bevelled edge)
Yellow/Black Tortoise Pattern 4 ply:
Yellow & Black Tort/White/Black/White (approx 2.3mm thickness - 45 degree bevelled edge)
Pearl Colours
(celluloid pearloid layer backed with pvc layers - typical thickness approx 2.4mm - 45 degree bevelled edge)
White Pearl 4 ply:
White Pearl/White/Black/White
Ivory Pearl 4 ply:
Ivory Pearl/Parchment/Black/Parchment
Cream Pearl 4 ply:
Cream Pearl/White/Black/White
Yellow Pearl 4 ply:
Yellow Pearl/White/Black/White
Golden Pearl 4 ply:
Golden Pearl/White/Black/White
Burnt Orange Pearl 4 ply:
Burnt Orange Pearl/White/Black/White
Bronze Pearl 4 ply
: Bronze Pearl/White/Black/White
Black Pearl 4 ply:
Black Pearl/Black/White/Black
Grey Pearl 4 ply:
Grey Pearl/Black/White/Black
Mint Pearl 4 ply:
Mint Pearl/Mint Green/Black/Mint Green
Green Pearl 4 ply:
Green Pearl/White/Black/White
Light Blue Pearl 4 ply:
Light Blue Pearl/White/Black/White
Blue Pearl 4 ply:
Blue Pearl/White/Black/White
Light Purple Pearl 4 ply:
Purple Pearl/White/Black/White
Purple Pearl 4 ply:
Purple Pearl/White/Black/White
Red Pearl 4 ply:
Red Pearl/White/Black/White
Cola Pearl 4 ply:
Cola Pearl/White/Black/White
Pink Pearl 4 ply:
Pink Pearl/White/Black/White
Shell Colours
(
- typical thickness approx 2.4mm - 45 degree bevelled edge)
Abalone Shell 4 ply:
Abalone Shell/White/Black/White
Black/White Shell 4 ply:
Black & White Shell/White/Black/White
Reverse Black/White Shell 4 ply:
Reverse Black & White Shell/White/Black/White
Blue/Yellow Shell 4 ply:
Blue & Yellow Shell/White/Black/White
Green/Black Shell 4 ply:
Green & Black Shell/White/Black/White
Orange/Black Shell 4 ply:
Orange & Black Shell/White/Black/White
Red/Green Shell 4 ply:
Red & Green Shell/White/Black/White
Red/Yellow Shell 4 ply:
Red & Yellow Shell/White/Black/White
Miscellaneous colours:
Flame Pattern #1:
(approx 2.4mm thickness - 45 degree bevelled edge)
Big Cat 4 ply:
Big Cat/White/Black/White (approx 2.3mm thickness - 45 degree bevelled edge)
Yellow/Black Tiger 4 ply:
Yellow & Black Tiger/White/Black/White (approx 2.3mm thickness - 45 degree bevelled edge)
Black/White Agate (Onyx) 4 ply:
Black & White Agate/White/Black/White (approx 2.4mm thickness - 45 degree bevelled edge)
Transparent Straight edge:
(approx 2.5mm thickness - straight
(no bevel)
edge)
Transparent Bevelled edge:
(approx 2.5mm thickness - 45 degree bevelled edge)
Mirror Colours:
Silver Mirror 1 ply
(approx 2.4mm thickness - 45 degree bevelled edge)
Gold Mirror 1 ply
(approx 2.4mm thickness - 45 degree bevelled edge)
Red Mirror 1 ply
(approx 1.6mm thickness - 45 degree bevelled edge)
Blue Mirror 1 ply
(approx 1.6mm thickness - 45 degree bevelled edge)
Purple Mirror 1 ply
(approx 1.4mm thickness - straight
(no bevel)
edge)
Pickguard FAQs:
Will it fit my guitar?
Pickguards are designed and manufactured to fit the specific guitar models referred to in each listing, but we cannot guarantee the pickguard will fit your guitar. You can check the pickguard's suitability for your own guitar before you purchase by using the contact seller link in the listing to request a pdf file containing a scan of the pickguard. Use the ruler in the scan to check that you print it out at full size. We recommend opening the file in Adobe Acrobat Reader - in the print dialogue box click on the 'size
' button and then click the 'actual size' radio button, or use 'custom scaling' to set a % value so that your ruler matches the ruler in the printout.
Can I try out colours and return those I don’t want?
We do not offer this service - pickguards are made to order so it is costly and wasteful to manufacture and transport pickguards which are not wanted. If you want to check colour match before purchase of a pickguard, to minimise the impact on the environment you can order samples
here
.
When should I remove the clear plastic protective film?
Please do not remove the film until you are sure that the pickguard is suitable for your guitar. We do not accept returns unless the protective film is intact.
Can I return a pickguard if it does not fit my guitar?
Please see our returns policy below. If you wish to return a pickguard because it does not fit your guitar, it will be treated as a non-faulty return.
Will a return be accepted if I have fitted pickups or controls to the pickguard, or if I have screwed the pickguard to my guitar body?
Returns are accepted only if the pickguard is in the condition as supplied. Fitting pickups or other controls to the pickguard will create marks on the surface of the pickguard, as may screwing the pickguard to your guitar's body. Returns will not be accepted if the pickguard has been marked by the fitting of pickups or controls, or by screwing the pickguard to a guitar body.
Can you supply this pickguard with a different pickup or control configuration?
Probably - please use the 'contact seller' link to send your specific requirements.
Do you make custom pickguards?
Yes - please use the 'contact seller' link to ask about custom pickguards.
I have a production model guitar but you do not list replacement pickguards for my guitar. Can you supply a replacement pickguard?
Yes - if you can send us
your original pickguard, we can use that as a template to make a replacement. Your original will be returned with the new pickguard. Please use the 'contact seller' link to ask about your guitar.
Information on production times is provided in the item description for items custom made to order.
Please add items to your shopping basket and then ask for a combined invoice.
Returns:
Faulty or Incorrectly Supplied Goods:
In the unlikely event that an item you receive is incorrectly supplied, or if it is received in a faulty or damaged condition, please contact us through eBay communications WITHIN 3 working days of receipt of the item to arrange a solution, and please include/attach photos with your message. Goods must then be returned along with the original packaging to arrive with us WITHIN 30 DAYS of receipt. We will inspect the goods and if the goods are confirmed to be faulty we will provide either a replacement (if requested and in stock) by return post or a full refund.
Non-Faulty Goods:
If you wish to return goods correctly supplied, you will be responsible for the cost of returning unwanted items and the goods must be returned in the same condition as supplied. To be entitled to a refund you must use eBay communications to inform us that you wish to return the item WITHIN 14 DAYS of receipt of the goods. Goods must be returned to the address supplied by us WITHIN 14 DAYS. Items must be returned in the original packing and in the same condition as supplied and with return costs fully paid. Your refund will be paid within 3 working days of receipt of items in the same condition as originally supplied, and will include the original purchase price of returned items, along with the lowest priced delivery option as set out in the original listing.
Returns will not be accepted if items have been modified or damaged in any way, including removal of any protective material attached to items at the time of supply.
This returns policy does not affect your statutory rights.
Privacy Policy:
Our privacy policy sets out what personal buyer information we receive from eBay and Paypal, how we use it and under what circumstances, if any, we will share it with other parties. We abide by and are compliant with the Data Protection Act 2018 (herein referred to as “The DPA”) and the General Data Protection Regulation (herein referred to as “the GDPR”). We are committed to keeping buyers’ personal information secure and confidential.
Lawful Basis for Processing Personal Data
For the purposes of the GDPR, we are the Data Processor when selling on eBay and we process all personal data lawfully, fairly and in a transparent manner. Under Article 6 of the GDPR, the lawful basis on which we process personal data received from eBay is that of “Contract” - whereby processing is necessary in order to fulfill buyer orders and enquiries. We retain information provided by eBay and Paypal, such as transaction information for internal financial accounting purposes. It is a legal requirement to retain this information for a period of 7 years.
Data We Receive: Personally Identifiable Information
We receive personally identifiable information from eBay and Paypal only when it is voluntarily submitted by buyers when placing an on-line order. The data we receive includes: name, billing address, delivery name, delivery address, e-mail address (in encrypted format), telephone number, date of order, items ordered, value of items ordered, chosen method of delivery. We do not sell or rent personally identifiable information to any third party for any purpose.
How we use buyers’ personal information
We may use any personal buyer information provided eBay and Paypal to:
·
process and dispatch buyers’ order/s
·
carry out regulatory checks to meet our legal obligations
·
prevent and detect crime
·
develop and improve our products
·
undertake anonymised statistical analysis (we won’t be able to identify individuals from this data)
We treat all information we hold about buyers as private and confidential. We will not reveal any personal details or details concerning buyers’ orders to anyone not connected with us, unless:
·
a buyer asks us to reveal their information, or we have a buyer’s permission to do so
·
we are required or permitted to do so by law
·
it is required by law enforcement, fraud prevention or credit reference agencies
We may share buyer personal information with our suppliers, service providers and other contractors only insofar as is required to fulfil orders buyers place with us on eBay.
Data Subject Access Requests
Under the GDPR buyers are entitled to obtain from us (the Data Processor for the purposes of the GDPR when selling on eBay a copy of the data held concerning them and to have any inaccuracies in the data rectified. We are obliged to provide this data to within one calendar month of the request and free of charge. However we have the right to refuse or charge for requests that are manifestly unfounded or excessive and repetitive.
Pickguards are designed and manufactured to fit the specific guitar models referred to in each listing, but we cannot guarantee the pickguard will fit your guitar. You can check the pickguard's suitability for your own guitar before you purchase by using the contact seller link in the listing to request a pdf file containing a scan of the pickguard. Use the ruler in the scan to check that you print it out at full size. We recommend opening the file in Adobe Acrobat Reader - in the print dialogue box click on the 'size' button and then click the 'actual size' radio button, or use 'custom scaling' to set a % value so that your ruler matches the ruler in the printout. If you wish to return goods correctly supplied, you will be responsible for the cost of returning unwanted items and the goods