Les Paul II Two 2 Les Paul 5-Ply Black Pickguard made for Epiphone Project NEW

Description

Available is a custom Epiphone Les Paul II black 5-Ply pickguard.  These guitars did not come with pickguards due to the volume control knob location.  I had a customer in my shop request one to protect the finish and enhance the appearance.  He did not want a standard LP pickguard with the bottom cut off.
As this is high production guitar, your pickups may not be aligned.  The pickguard pickup cavities are straight.  You may have an 1/8" gap as the customer's LP did.  There seems to be some variation with the LP II's.
This pickguard measures 2-3/16" (55 mm) between pickup rings.
I also have this pickguard with 2-3/8" (60 mm) between pickup rings.  If you need this one, just leave me a note.
It was handcrafted in my USA shop with the edges hand finished and buffed to produce a high quality pickguard to compliment your guitar.
This pickguard has a 45 degree beveled edge.
The acrylic material is .110" thick with the wide white fourth layer.
This is made without mounting holes that is attached with included double sided tape.  This also available with mounting holes and screws.  I also make this in a Left Hand model.  Just leave me a note.  Many colors are available.
The guitar is not included (for the other guy that would ask).
This pickguard will not fit Epiphone Les Paul II Specials that have pickups and volume knobs located in different locations.  Eyeball the knob location and let us know if you need the "Special" where the knob is located higher up.
Be sure and check my 100% positive feedback on the all the pickguards and armrests that I've sold over the years.  If you are not a 100% completely satisfied, I offer a 30 day refund on your purchase excluding return shipping.  Item must be in new unused condition.  I pack well and ship quickly.