Vintage HP 8175A Signal Generator with Cover, Probes and Accessories

Description

Vintage HP 8175A Signal Generator with Probes and Accessories
SN: 2520G00186
This is a Vintage item.  Came from working environment and tested for power only.  There are light signs of wear as shown in images, mostly tape residue.
Specs:
Outputs Data channels : 24, each 1024 bits
Max data rate : 50 Minis, NRZ format (If Serial Mode is selected, two 8-Kb channels are available, max data rate 1011 Mb/s, NRZ format.)
Levels : ECL, TTL, or variable-level TTC./CMOS pods . Different pods can be installed for mixed logic applications (each pod handles 8 channels).
Variable level from 2.4 V to 9.9 V, programmable from FIP 8175A or external pod input.
Fanout : 5 ECL/ 15 LSTTL/ 10/ LSTTL loads, depending on pod.
Transitions: 316/ 9 Us into 22 IF, depending on pod.
Tristate : Implemented from HP 8t75A or by external signal to each pod.
Analog channels (Opt 002) : 2 arbitrary waveform channels, each t0-bit vertical resolution with 1024 sample points .
Max sample rate : 50 NIHz .
Level ranges : 7. From 0.2 V p-p mix (0 .2 mV resolution) to 16 V p-p max (20 mV resolution), into 50 52 Source resistance : 50 O
Flag and clock channels: 8 flags, or 7 flags and I clock. Flags are set by external status (see trigger pod) .
Clock period can be set from 20 ns to 99ps, independent of bit duration .
Levels : Depends on pods (see Data channels).
Timing Bit duration : 0.02 us to 9.99 s, individual or global
Resolution : 3 digits . (Opt00l: 100 ps independent edge positioning on 4 channels in a 2"1.0 to 411 .0 Us window)
Memory: 24 x 1014 bits, up to 255 segments
Capabilities : Start, stop, continue, restart, 2jumps, and looping Inputs
Trigger pod : 8 lines to set flags and/or implement start, jump, output disable, stop and continue
BNC inputs : For external clock, external I Mllz reference and start/ stop